Brake-hose-and-assembly

PRODUCTS

▼▼▼▼▼▼▼
Fuel hose and assembly

▼▼▼▼▼▼▼

Nylon fuel hose and assembly

▼▼▼▼▼▼▼
Air Conditioning hose and assembly

▼▼▼▼▼▼▼
Power-Steering hose and assembly

▼▼▼▼▼▼▼
Turbo Charging hose and assembly

▼▼▼▼▼▼▼ Brake hose and assembly

▼▼▼▼▼▼▼

Coolant hose and assembly

▼▼▼▼▼▼▼
Transmission/ Engine Cooling hose and assembly

▼▼▼▼▼▼▼
Hose Clamp

Brake hose and assembly

◆Hydraulic brake hose	High pressure: the burst pressure shall be higher than 49Mpa(ID 3.2mm). Lower swelling: SAE J1401 require volume swelling shall be less than 1.08cc/m at 6.9Mpa.
◆Air brake hose
◆Vacuum brake hose

–